Safety Information; Fcc Statement - Husky 934 631 Use And Care Manual

Safety Information

PLEASE READ AND SAVE THESE INSTRUCTIONS
CAUTION: Read, understand, and follow
all safety rules and instructions before using
this tool. These safety instructions should be
followed at all times. Failing to follow these
safety instructions could result in injury to
yourself or others. Also, failing to read and
follow these instructions may cause damage to
your equipment.
WARNING: BE SURE TO read and understand
all instructions. Failing to follow all instructions
listed below may result in electric shock, fire,
and/or serious personal injury.
WARNING: This battery-operated tool uses
only "AAA" batteries. Using any other batteries
may create a risk of fire.
WARNING: Carefully follow all instructions
and warnings on the battery label and package.
WARNING: Remove dead batteries
immediately and dispose of them according to
your local ordinance.
WARNING: Always insert the batteries
correctly. The polarity (+ and -) is marked on
the batteries and on the tool. DO NOT:
Short the battery terminals.
… …
Charge the batteries.
… …
Mix old and new batteries. If either or
… …
both of the batteries are weak, replace
both of them with two new batteries.
These new batteries should match each
other in brand and type.
Dispose of batteries in a fire.
… …
WARNING: Keep batteries out of the reach
of children.
WARNING: Remove batteries if the device
will not be used for several days.
WARNING: Use only accessories that are
recommended by the manufacturer for your
model. Accessories that may be suitable for
one tool may become hazardous when used on
another tool.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
NOTICE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the
separation between the equipment and receiver. Connect
the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the
dealer or an experienced radio/TV technician for help.