Toro Groundsmaster 4300-D Operator's Manual page 14

1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press this
button to access the InfoCenter menus. You can
use it to exit any menu that you are currently using.
•
Middle Button—use this button to scroll down
menus.
•
Right Button—use this button to open a menu
where a right arrow indicates additional content.
•
Beeper—activated when lowering the cutting units
or for advisories and faults.
Note:
The purpose of each button may change
depending on what is required at the time. Each
button is labeled with an icon displaying its current
function.
Figure 10
3. Middle button
4. Left button
InfoCenter Icon Description
SERVICE DUE
g020650
14
Indicates when scheduled service
should be performed
Hours remaining until service
Reset the service hours
The status of the engine speed (rpm)
Info icon
Maximum traction speed setting
Fast
Slow
The fan is reversed.
Stationary regeneration is required.
The air-intake heater is active.
Raise the left cutting unit.
Raise the center cutting unit.
Raise the right cutting unit.
The operator must sit in the seat.
The parking brake is engaged.
The range is high.
Neutral
Identifies the range as Low
Coolant temperature (°C or °F)
Temperature (hot)
Traction or Traction Pedal
Not allowed