Toro Groundsmaster 4300-D Operator's Manual page 13

1. Lower mow/raise control
lever
2. Key switch
3. InfoCenter
Key Switch
The key switch (Figure
O /P , and S
N REHEAT TART
Lower Mow/Raise Control Lever
This lever (Figure 7) raises and lowers the cutting
decks and also starts and stops the mowers when the
mowers are enabled in the mow mode. When starting
the decks in the down position, this lever will turn the
decks on if the PTO and the mow speed limiter are
engaged.
Headlight Switch
Pivot the switch downward to turn on the headlights
(Figure 7).
Enable/Disable Switch
Use the enable/disable switch
with the lower mow/raise control lever to operate the
mowers. You cannot lower the mowers when the
mow/transport lever is in the T
InfoCenter
The InfoCenter LCD display shows information about
your machine such as the operating status, various
diagnostics and other information about the machine
(Figure 7).
Hydraulic-Filter-Restriction
Indicator
With the engine running at normal operating
temperature, view the indicator
Figure 7
4. Enable/disable switch
5. Engine-speed switch
6. Headlight switch
7) has 3 positions: O
.
(Figure 7) in conjunction
position.
RANSPORT
(Figure 8), it should be
in the green zone. When the indicator is in the red
zone, change the hydraulic filters.
g021208
1. Hydraulic-filter-restriction indicator
Power Point
,
FF
The power point is a 12 V power supply for electronic
devices (Figure
1. Power point
Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about
your machine, such as the operating status, various
diagnostics and other information about the machine
(Figure 10). There is a splash screen and main
information screen of the InfoCenter. You can switch
between the splash screen and main information
screen at any time by pressing any of the InfoCenter
buttons and then selecting the appropriate directional
arrow.
13
Figure 8
9).
Figure 9
g031683
g031682