Setting Battery Alarms; Conserving Battery Power - Toshiba NB305-N310 User Manual

100
Mobile Computing
Monitoring main battery power
If you have Hibernation mode enabled (the default), the computer
copies the details of your open programs and files to the internal
storage drive before shutting down. For more information on using
Hibernation, see

Setting battery alarms

You can set two alarms. Each alarm can be set to alert you when a
specified percentage of remaining battery power has been reached.
You can set how the warning occurs: sound an alarm, display a
message, both, or none. You can also set the computer to enter
Standby mode or Hibernation mode or to completely power down
when the alarm goes off.
To change the default alarm settings:
1 Click Start, Control Panel, Performance and Maintenance,
and then TOSHIBA Power Saver.
2 Click the Setup Action tab.
3 Configure the Alarm settings to suit your needs.

Conserving battery power

How long a fully charged battery pack lasts when you are using the
computer depends on a number of factors, such as:
How the computer is configured
How much you use the internal storage drive or other optional
devices
Where you are using the computer, since operating time
decreases at low temperatures
There are various ways in which you can conserve power and
extend the operating time of your battery:
Enable Standby or Hibernation, which saves power when you
turn off the computer and turn it back on again
Use Toshiba's power-saving options
These power-saving options control the way in which the computer
is configured. By using them, you can increase the length of time
you can use the computer before you need to recharge the battery.
Toshiba has combined these options into preset Power Profiles.
Using one of these profiles lets you choose between maximum
power savings and peak system performance. You may also set
individual power-saving options to suit your own needs.
"Hibernation mode" on page 73.