Advertisement
9. - Unclip the drain hose from the holders marked by the arrows (depending on the model).
- If the drain hose is installed inside your washing machine, pull the hose completely out of
the holder and close the opening with cap "A" attached.
10.- Firmly connect the drain hose to a siphon or standpipe for drain water (if necessary
use the U-bend provided with the washing machine; it must be fixed at the end of
the drain hose).
Important
• Make sure there are no kinks in the drain hose.
• Make sure the hose is firmly connected to siphon
or standpipe.
• To make an extension, use a hose of the same
type and secure the connections with clips.
• Max. Overall drain hose length: 2.50 m.
- Use a socket with an earth connection.
- Do not use extension leads or multi sockets.
- The electrical power cable must be replaced exclusively by a licensed electrician.
- Electrical connections must be made in accordance with local regulations.
5019 102 00xxx
CONNECT THE DRAIN HOSE
A
ELECTRICAL CONNECTION
Advertisement
