Advertisement
was created. You may view the file on-line if you run CDSETUP from the 32X-14X Internal IDE CD Rom Drive
Option Diskette.
Installing the Device Driver for Windows 95:
In most instances, Microsoft Windows 95 will automatically detect the CD-ROM drive. If the CD-ROM drive is
automatically detected, Windows 95 will then use the device drivers which are included with the operating
system, and you will not need to install the drivers on the Option Diskette. If Windows 95 is in 32-bit mode for
IDE, the CD-ROM drive will be recognized by the operating system. Otherwise, follow the instructions on your
screen to install the device drivers from the Option Diskette.
Installing the Device Drivers for DOS, DOS with Windows 3.X, Windows 95 in MS-DOS mode, or OS/2
Warp version 3.0 or Higher:
1. Go to a command line.
2. Insert the Option Diskette into drive A.
3. Type in A:CDSETUP, then press Enter.
4. Using your mouse or the arrow keys, select Setup.
5. Follow the instructions on your screen to properly install the driver.
6. When setup is complete, select Exit.
7. You will be prompted to restart your system; the changes will not take effect until you do so.
Note: To resolve resource conflicts or if you need options that are not found in the CDSETUP device-driver
installation program, refer to the READ.ME file on the Option Diskette. If you have problems installing the
device driver, refer to the CDSETUP program help information.
Installing the Device Driver for Windows NT 3.51:
1. Start Windows.
2. Click on the Start button and open the Main folder.
3. Click on Control Panel.
4. Double-click on Devices.
5. Click on atapi.
6. Click on Startup.
7. Click on Boot.
8. Click on OK.
9. Click on Cdfs.
10. Click on Startup.
11. Click on System.
12. Click on OK.
Advertisement
