Setup; Activating, Charging, And Connecting The Battery - Toro Groundsmaster 3500-G Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
Media and Additional Parts
Description
Operator's Manual
Engine owner's manual
Ignition keys
Note:
Determine the left and right sides of the machine from the normal operating position.
1
Activating, Charging, and
Connecting the Battery
No Parts Required
Procedure
Note:
If the battery is not filled with electrolyte or
activated, purchase bulk electrolyte with 1.26 specific
gravity from a local battery-supply outlet and add it to
the battery.
Description
No parts required
No parts required
Inclinometer
No parts required
No parts required
No parts required
No parts required
No parts required
Qty.
–
–
1
–
–
–
–
–
Qty.
1 Review it before operating the machine.
1 Use it to reference engine information.
2 Start the engine.
DANGER
Battery electrolyte contains sulfuric acid
which is fatal when consumed and causes
severe burns.
• Do not drink electrolyte and avoid contact
with skin, eyes, or clothing. Wear safety
glasses to shield your eyes and rubber
gloves to protect your hands.
• Fill the battery where clean water is always
available for flushing the skin.
1. Remove the battery cover
9
Use
Activate, charge, and connect the
battery.
Add the rear wheel ballast.
Check the angle indicator.
Adjust the lift arms.
Adjust the carrier frame.
Adjust the height of cut.
Adjust the roller scraper (optional).
Install the mulching baffle (optional).
Use
(Figure 3).