Motion Control Cable Replacement; Motion Control Cable Removal - Toro GrandStand 74534 Service Manual

CONTROLS

Motion Control Cable Replacement

Motion Control Cable Removal

1. Remove the shoulder bolt and flange nut securing
the end of the control cable to the motion control
lever (Fig. 223).
4
2. Remove the spring clip from the cross bracket (Fig.
224).
4-12
Fig. 223
DSCN-3671a
Fig. 224 DSCN-3672a
3. Remove the cable adjustment nut from the cross
bracket (Fig. 225).
Fig. 225
4. Remove the two thread forming screws and cable
clamp securing the lower cable to the cable bracket
(Fig. 226).
Fig. 226
36" & 40" Toro GrandStand Service Manual
DSCN-3674a
DSCN-3679a