Table of Contents
Advertisement
To reduce potential fire hazard, keep the engine free of
excessive grease, grass, leaves and accumulations of
dirt.
Be sure machine is in safe operating condition by
keeping nuts, bolts and screws tight.
Make sure all hydraulic line connectors are tight, and all
hydraulic hoses and lines are in good condition before
applying pressure to the system.
Keep body and hands away from pin hole leaks in
hydraulic lines that eject high pressure hydraulic fluid.
Use cardboard or paper to find hydraulic leaks.
Hydraulic fluid escaping under pressure can penetrate
skin and cause injury. Fluid accidentally injected into
the skin must be surgically removed within a few hours
by a doctor familiar with this form of injury or gangrene
may result.
Before disconnecting or performing any work on the
hydraulic system, all pressure in system must be
relieved by stopping engine and placing the remote
hydraulic valve in the float detent position.
If the engine must be running to perform a maintenance
adjustment, keep hands, feet, clothing and other parts of
the body away from the engine and other moving parts.
To ensure optimum performance and safety, always
purchase genuine TORO replacement parts and
accessories to keep the Toro all TORO. NEVER USE
"WILL–FIT" REPLACEMENT PARTS AND
ACCESSORIES MADE BY OTHER
MANUFACTURERS. Look for the TORO logo to
assure genuineness. Using unapproved replacement
parts and accessories could void the warranty of The
Toro Company.
4
Advertisement
Table of Contents
