Table of Contents
Advertisement
3
Close the display panel and remove any cables you may have
connected.
4
Turn the computer upside down.
5
Locate and remove the screws that hold the cover plate in
place, and lift the cover off of the memory module bay.
Removing the memory module cover
Static electricity can damage the memory module. Before
you handle the module, touch a grounded metal surface
to discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its pin connector on the side you insert into the
computer.
6
Remove the new memory module from its antistatic
packaging.
7
Insert the memory module in the slot and gently press it down
into place.
The clips on either side of the module will click to secure the
module.
Connecting Other External Devices
Adding memory
73
Advertisement
Table of Contents
