Table of Contents
Advertisement
Connecting external speakers or headphones
To attach an external stereo output device:
1
Locate the headphone jack on the front of the computer.
2
Using any necessary adapters, plug the cable from the
external audio device into the headphone jack. The
headphone jack requires a 3.5 mm 16-ohm stereo jack.
When the headphone is inserted, the internal speakers are
automatically disabled.
Connecting a microphone
To record high-quality sounds, you can attach a microphone:
1
Locate the microphone jack on the front of the computer.
2
Plug the microphone cord into the microphone jack.
3
Turn on the microphone.
For more information, see
Adding memory
Your Satellite M20 computer is equipped with up to two memory
module. The two memory slots in this computer provide various
memory configurations. When additional memory is added, or
original memory replaced, it is recommended that you use only
compatible memory. In the event original memory is replaced with
invalid memory, the system will beep and will not boot beyond the
BIOS memory check. A message may display. If this occurs,
Connecting Other External Devices
Connecting external speakers or headphones
HINT: To purchase additional memory modules, see the
accessories information packaged with your system or
visit
.
toshiba.com
"Recording sounds" on page
71
145.
Advertisement
Table of Contents
