Default Settings - Toshiba Qosmio G35-AV650 Series User Manual

The following menu is displayed:
Your machine supports Redundant Array of Independent
Disks (RAID). Please select the RAID level.
1. Factory Default
Setup the computer ready to support mirroring
function. You can use RAID Utility to configure two
hard disks to become mirror of each other, in which
the same data is written on both hard disks. If one
hard disk fails, the system can still run from the
other hard disk. Before using RAID Utility, your
second hard disk can still work as independent hard
disk.
Advance Setting (for Advance users only)
2. RAID-1 - Automatically configure two hard disks
of your computer to become mirror after recovery
process is completed.
WARNING: You can not use the second hard disk for
any other purpose until you use RAID Utility to end
mirroring.
3. RAID-0 - Automatically configure computer to
support striping function - data is broken into
blocks and written to both hard disks simultaneously
to increase the hard disk performance.
WARNING: IF ONE HARD DISK FAILS, ALL DATA IS LOST.
Enter selection:"
(Sample Illustration) Toshiba Recovery DVD RAID Menu
5 Press 1 and then press Enter to break the RAID-0 array.
All data is permanently erased from both of your computer's
internal hard disk drives and the computer is restored to its

default settings.

This process takes approximately one hour to complete.
NOTE
Using the RAID-0 or RAID-1 Utility
Toshiba RAID Console Utility
287