Toshiba System Settings - Toshiba Satellite Pro R50-D Series User Manual

Click Start -> TOSHIBA -> Password Utility , and click Supervisor
Password.
This utility lets you do the following:
Starting the computer using a password
If you have already registered a user password, there is one way to start
the computer:
The password is necessary only if the computer was shut down in
Hibernation mode, boot mode or Restart. It is not needed in Sleep mode.
To enter a password manually, do the following:
1.
At this point, the function keys do not work. They will function after you
enter the password.
2.
3.
If you enter the password incorrectly three times in a row, or if you donnot
enter the password within 1 minute, the computer shuts down. In this case,
some features that can power on the computer automatically (Wake-up on
LAN, Task Scheduler, etc) might not work. You must turn the computer
back on to retry password entry.

TOSHIBA System Settings

TOSHIBA System Settings is the TOSHIBA configuration management tool
available through the Windows operating system.
To run TOSHIBA System Settings, click Start -> TOSHIBA -> System
Settings.
The TOSHIBA System Settings window contains a number of tabs to allow
specific functions of the computer to be configured.
In addition there are also three buttons: OK, Cancel and Apply.
OK
Cancel
User's Manual
Register or delete the Supervisor Password.
Specify restrictions for general users.
Enter the password manually.
Turn on the power as described in the
following message appears in the screen:
Password =
Enter the Password.
Press ENTER.
Getting Started
Accepts your changes and closes the TOSHIBA
System Settings window.
Closes the window without accepting your
changes.
section. The
5-7