Toshiba IPedge IP5000 Series Installation Instructions Manual page 32

CO Line Specifications
Table 1-4 IP5122-SDC Functions in Analog CO Line Operation
Feature
Handset / Headset
Handset mute
Off-Hook Dialing
Hands free
Ring tone
Volume
Analog CO
Signaling
Hold Tone
Caller ID
Display
PAD
IP5122-SDC Headset
Transmit Level
Adjustment
1-20
VIPedge based features, such as transfer or conference are available. No
IPT features such as speaker phone or calling number display are
available.
A CO Line can be shared between an IP5122-SDC and another analog
device like a fax machine or modem. In this application the IP5122-SDC
will not show the status of the shared CO line nor detect when it is in use.
A single analog co line shared between two or more IP5122-SDCs can be
setup with Privacy "on" to control co line access one station at a time
Functions for both IPT and Analog CO operation
Not supported
Functions for both IPT and Analog CO operation
Not supported in analog CO mode. The speaker functions, allowing
the station user to hear. The microphone does not function in analog
CO mode
IPT ring and analog CO line ring are different
Ring and Speaker volume are adjustable
DTMF only (Dial Pulse is not available) 80 ms minimum tone duration
Hold Tone and Music on Hold are not sent on the analog CO line.
No caller ID function
Dialed digits and elapsed time are not displayed
a 3dB PAD can be added to the analog CO line
The IP5122-SDC headset transmit level for ACO and IPT operation are
set by programming from the station.
1. Press 3+6+9+Hold (simultaneously).
2. Press # then press Hold.
IP5122-SDC Headset Transmit Level Adjustment
Operation
IPT Installation Manual Feb,, 2015