Adjusting The Quality Of The External Display - Toshiba F40-ST4101 User Manual

64
Getting Started
Using external display devices
(Sample Image) Display options window
NOTE
NOTE
2 Release the

Adjusting the quality of the external display

To obtain the best picture quality from your television (or other
video display device), you may need to adjust the video settings.
See the video device documentation for additional configuration
steps.
Built-in display and external monitor (extended desktop)
Built-in display and TV (extended desktop)
The dual display modes (internal display and external device) cannot
be used while you are watching an HD DVD.
The right-most icon in the above illustration is for the Swap Image
Display mode. This mode is available only if the current setting is an
extended desktop mode (Built-in Display and External Monitor, or
Built-in Display and TV). In extended desktop mode, the image is
split into two sides, one side per display device. To swap sides,
select Swap Image Display.
Fn key.
TECHNICAL NOTE: To use one of the simultaneous modes, you must
set the resolution of the internal display panel to match the
resolution of the external display device. The external display device
must support a resolution of 800 X 600 or higher.