Control Buttons; Disabling Or Enabling The Touchpad; Using External Display Devices - Toshiba F40-ST4101 User Manual

Control buttons

When a step instructs you to click or choose an item, move the
cursor to the item, then press and release the primary (left-hand)
button. To double-click, press the primary button twice in rapid
succession. The primary button usually corresponds to the left
mouse button.
The function of the secondary (right-hand) button depends on the
program you are using. It usually corresponds to the right mouse
button ("right-clicking"). Check your program's documentation to
determine whether it uses the right mouse button.

Disabling or enabling the TouchPad

The TouchPad
TouchPad setting, press
TouchPad. For more information, see
TouchPad" on page

Using external display devices

Your computer comes with a built-in LCD display, but you can also
connect the following types of external display devices to the video
ports described below:
An HDMI-compatible television or VCR/DVD player via the
HDMI Out port
NOTE
A standard television, projector, or VCR/DVD player via the S-
video Out port
An external monitor or projector via the RGB (monitor) Out
port
*Available on certain models
(Sample Illustration) Back of system
Using external display devices
™
is enabled by default. To change the enable/disable
217.
The HDMI port is available on certain models.
RGB (Monitor Out) port
™
Fn + F9 . This hot key enables/disables the
"Disabling or enabling the
Getting Started
HDMI Out port*
S-video Out port
59