Select Hearing Impaired Subtitle; Teletext Language; Common Interface; Hdmi Overscan - Sharp LC-32LE320E Operation Manual

tV menu
1�
Press menu on the remote control and select
Features > Subtitle�
2�
Press oK or ≥ to enter Subtitle.
3�
<> to select 1st Subtitle or 2nd
Press
Subtitle.
4�
Highlight your selection and press
a subtitle language.
5�
Follow the on-screen instructions to exit.
note
• If your selected subtitle language is not broadcast, the
default language subtitle will be displayed.
1st Subtitle language you selected is not
• If the
available, the 2nd Subtitle language will be displayed.

Select Hearing impaired subtitle

E
When watching channels with hearing impaired service,
you can enable the subtitle commentary for the hearing
handicapped. For digital channels only.
1�
menu on the remote control and select
Press
Features ≥ Subtitle.
2�
oK or ≥ to enter Subtitle.
Press
3�
Press <> to select Subtitle type.
4�
Press ≤≥ to select Hearing impaired as your
subtitle type.
5�
Follow the on-screen instructions to exit.

teletext language

You can select Teletext Language when the TV receives
Teletext signals broadcast by a TV network. (See page
11.)

Common interface

This function enables you to watch encrypted services
(pay services). (See page 25.)
note
• This functions may not work depending upon the
country broadcasting circumstances.

HDmi overscan

When you watch TV via HDMI input source, you could
use this function to enlarge the picture. It may have few
loss of video content.
1�
Press menu on the remote control and select
Features > HDmi Scan info
2�
Press ≤≥ to select one of the following:
• Select auto to scan the picture automatically.
• Select underscan to disable.
• overscan to activate.
Select
3�
Follow the on-screen instructions to exit.

manual oaD Download

When you get the software updating news from the
retailer or internet, you can update the operation
software using the OAD (Over Air Download)
≤≥ to select
Download. The updated software data will be
transferred through the TV signal.
1�
Press
Features ≥ oaD ≥ manual oaD Download.
2�
Press
3�
Follow the on-screen instructions to download
the updated software.
note
• Please do not switch off the TV during the downloading
process.

reset Default

When you activate the reset Default, the TV enters to
first time installation.
1�
Press
Features ≥ reset Default.
2�
Press
3�
Select
control to confirm.
4�
Follow the on-screen instructions to reset your
TV settings.
DivX® Setup
This is the function to confirm your registration code.
You need to register the code at www.divx.com.
DivX® registration (VoD)
E
You can find your registration code on this menu. You
need to register the TV at www.divx.com before playing
the DivX® content.
1�
Press
Features ≥ DivX® registration.
2�
Press
3�
Follow the on-screen instructions to exit
menu on the remote control and select
oK or ≥ to enter.
menu on the remote control and select
oK or ≥ to enter.
oK and press oK on your remote
menu on the remote control and select
oK or ≥ to enter.
.
19