Position The Tv - Sharp LC-46LE631E Operation Manual

Position the TV

Placement

Before you position the TV, read all
safety precautions. See Get Started >
Important > Safety (Page 6).

Position the TV where light does not
shine directly on the screen.

The ideal distance from which to watch
TV is three times its diagonal screen
size. For example, if the diagonal screen
size of the TV is 117cm / 46", the ideal
viewing distance is ~3.5m / ~138" from
the front of the screen.

While seated, your eyes should be level
with the centre of the screen.
Wall mount
To mount the TV, purchase a SHARP TV
mount or a compatible TV mount. Check
your TV screen size and match it against the
list for the type of wall mount to purchase:
81 cm / 32 inches : 200mm x 200mm, M6
102 cm / 40 inches: 400mm x 400mm, M6
117 cm / 46 inches: 400mm x 400mm, M6
Warning: Follow all instructions provided
with the TV mount. SHARP bears no
responsibility for improper wall mounting
that results in accident, injury or damage.
To prevent damage to cables and
connectors, leave a gap of at least 5.5 cm /
2.2 inches from the back of the TV.
For 32 inch to 46 inch TVs:
Before you wall mount the TV, find the
correct length of screw.
To find the length of screw, add the
thickness of your wall mount to the screw
length, as shown in the graphic.
Stand mount or wall mount
To apply the best settings for your TV, select
wall mount or stand mount.
1. Press MENU.
2. Select [Setup] > [TV settings] >
[Preferences] > [TV placement].
3. Select [On a TV stand] or [Wall
mounted], then press OK.
Location
A range of TV settings are applied to suit the
location of the TV.
Shop or home mode
Set the TV location to Home mode to
access all TV settings. In Shop mode, you can
access only a few settings.
1. While you watch TV, press MENU.
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Location] > [Home] or [Shop],
then press OK.
4. Restart the TV.
EN 9