Sharp LC-46LE631E Operation Manual page 28


[Amplifier]: Stream audio through the
connected HDMI-CEC device. If system
audio mode is not enabled on the
device, audio continue to stream from
the TV speakers. If [Link operation
autostart] was enabled, the TV
prompts the connected device to
switch to system audio mode.
Retain picture quality
If your TV picture quality is affected by the
picture-processing features of other devices,
switch on Brilliant colour processor +.
To switch on Brilliant Colour Processor+
1. Press MENU.
2. Select [Setup] > [TV settings] > [Link
operation].
3. Select [Brilliant Colour Processor +] >
[On], then press OK.
Maximize video display
Some subtitles can create a separate subtitle
bar under the video, which limits the video
display area. After you switch on auto
subtitle shift, the subtitles display over the
video image, which maximises the video
display area.
Switch on auto subtitle shift
1. Press MENU.
2. Select [Setup] > [TV settings] > [Link
operation] > [Auto subtitle shift].
3. Select [On], then press OK to activate.
Note: Make sure that the picture format of
the TV is set to [Auto format] or [Movie
expand 16:9].
Hear another device at TV standby
You can hear a connected HDMI-CEC
compliant device through the TV speakers,
even when the TV is in standby.
1. Press ADJUST to receive audio from the
connected SHARP Link operation device.
If available, audio only mode is enabled.
2. Accept the prompt on the TV to turn off
the TV screen.
3. Control the audio playback with the TV
remote control.
EN 29