Sharp LC-46LE631E Operation Manual page 27

Control devices simultaneously
If you connect multiple HDMI-CEC devices
that support this setting, all the devices
respond to the TV remote control.
Caution: This is an advanced setting. Devices
that do not support this setting will not
respond to the TV remote control.
1. Press MENU.
2. Select [Setup] > [TV settings] > [Link
operation].
3. Select [Link operation remote control] >
[On] or [Off].
4. Press OK to activate.

Notes:
To switch back to TV control, press
MENU, then select [Watch TV].

To control another device, press
MENU, then select the device from the
TV menu.

To exit, press
Link operation buttons
Control HDMI-CEC compliant devices with
the following buttons on the TV remote
control.

OK: Start, pause or resume play on the
connected device, activate a selection,
or access the device menu.

(Previous) /
backwards and forwards on the
connected device.

Alphanumeric buttons: Select a title,
chapter or track.

Play buttons: Control video or music
play.

Standby: Display the menu of the
connected device.

MENU: Display the TV menu.

(Standby): Switch the TV and the
connected device to standby.
Other Link operation buttons are available
through the On-Screen Remote Control
(OSRC).
EN 28
.
(Next): Search
To access the OSRC
1. While you view content from a connected
device, press OPTIONS.
2. Select [Show device keys], then press
OK.
3. Select an onscreen button, then press OK.
4. Press to exit.
Select speaker output
If the connected device is HDMI Audio
Return Channel (HDMI ARC) compliant,
you can output TV audio through an HDMI
cable. An additional audio cable is not
required. See Connect your TV > About
cables > HDMI (Page 36)
Configure TV speakers
1. Press MENU.
2. Select [Setup] > [TV settings] > [Link
operation] > [TV speakers].
3. Select one of the following options, then
press OK:

[Off]: Switch off TV speakers.

[On]: Switch on TV speakers.

[Link operation]: Stream TV audio
through the connected HDMI-CEC
device. Switch the TV audio to the
connected HDMI-CEC audio device
through the adjust menu.

[Link operation autostart]: Turn off TV
speakers automatically and streams TV
audio to the connected HDMI-CEC
audio device.
Select speaker output with Adjust menu
If [Link operation] or [Link operation
autostart] are selected, access the adjust
menu to switch the TV audio.
1. While you watch TV, press ADJUST.
2. Select [Speakers], then press OK.
3. Select one of the following, then press
OK:

[TV]: On by default.
Stream TV audio through TV and the
connected HDMI-CEC audio device
until the connected device switches to
system audio control. TV audio is then
streamed through the connected
device.