Menu Language; Other Settings; Update Software - Sharp LC-46LE631E Operation Manual

Menu language

1. While you watch TV, press MENU.
2. Select [Setup] > [TV settings] >
[Preferences] > [Menu language].
3. Select a menu language from the list, then
press OK.

Other settings

TV demo
Start a demo to find out more about your
TV's features.
Note: Demos are not supported on MHEG
channels.
1. While you watch TV, press MENU.
2. Select [Setup] > [Watch demos], then
press OK.
3. Select a demo, then press OK.
4. Press to exit.

Update software

TV software
Check software version
1. Press MENU.
2. Select [Setup] > [Software settings] >
[Current software info], then press OK.
The version of the current software is
displayed.
Update the software through one of these
options:

Update with USB flash drive

Update from digital broadcast

Update from the Internet
For more information, see the following
pages.
EN 34
Update with USB
Before performing this procedure, make sure
that you have the following:

Spare time to complete the entire
update.

A USB flash drive that has at least
256MB of storage space, is FAT or
DOS formatted, and has its write
protection disabled.

Access to a computer with a USB port
and internet access.
1. Press MENU.
2. Select [Setup] > [Update software], then
press OK.
The update assistant starts.
3. Follow the onscreen instructions to start
the update.
Update from the Internet
To update the TV software directly from the
Internet, connect the TV to the Internet
through a router with a high-speed
connection.
1. Press MENU > [Setup] > [Update
software] and press OK.
2. Select [Internet] and press OK.
3. Follow the onscreen instructions .
When the update is complete, the TV
switches off and back on again automatically.
Wait for the TV to switch back on; do not
use the power switch on the TV.
Note: If the TV is connected to the Internet,
the TV displays the availability of new
software at startup.
Update from digital broadcast
If available, your TV can receive software
updates through digital broadcasts.
If an update is available, a message appears
prompting you to update the software. We
strongly recommend that you update the
software when prompted.
Note: If you choose to update the software
at a later time, select MENU > [Setup] >
[Software settings] > [Local updates].