Input Select; Input Label; Colour System - Sharp AQUOS LC-70LE836E Operation Manual

Useful viewing functions
Input source settings
Option

Input select

For setting the signal type of external equipment.
Press b to select the input source for setting
1
the input signal ("EXT1") from the "INPUT"
menu, and then press ;.
Go to "Menu" > "Setup" > "Option" > "Terminal
2
setting" > "Input select".
Item
Y/C, CVBS, RGB
EXT1
NOTE
• If no (colour) image displays, try changing to another
signal type.
• Check the operation manual of the external equipment
for the signal type.
Option

Input label

You can label each input source with a custom description.
Press b to select the desired input source
1
from the "INPUT" menu, and then press ;.
Go to "Menu" > "Setup" > "Option" > "Terminal
2
setting" > "Input label".
Select each character of the new name for the input
3
source with using the software keyboard (Page 13).
NOTE
• The label can be six characters or less.
• You cannot change labels if the input source is "TV",
"USB media", "Home network" or "NET".
CH list
INPUT
TV
Switchable
Selecting the HDMI picture size
automatically
Option
HDMI auto view
This function allows you to automatically change to
the appropriate picture size when viewing an HDMI
signal using the HDMI 1, 2, 3 and 4 terminals.
Press b to select the input source ("HDMI 1",
1
"HDMI 2", "HDMI 3" or "HDMI 4") connected to
your HDMI device, and then press ;.
Go to "Menu" > "Setup" > "Option" > "Terminal
2
setting" > "HDMI auto view".
Option
Headphone/Audio out select
You can select which device is used for outputting
audio.
Go to "Menu" > "Setup" > "Option" > "Terminal
setting" > "Headphone/Audio out select".
Item
Output audio through headphones.
Headphone
Output audio through an A/V receiver
Audio out
or surround audio controller.
CAUTION
• This terminal is also used for headphones. Reduce the
volume before using headphones. Overwhelming sound
may damage your hearing.
NOTE
• If you select "Audio out" when a cable is inserted in the
HDMI 2/PC AUDIO (L/R) terminal, the TV speakers are
muted.
• When you select "Audio out", you can adjust the TV
sound volume with the Yk/l buttons on the TV or
i+/- buttons on the remote control unit.
44
Option
Headphone out setting
You can select the headphone/speaker audio output
when using the headphones.
Go to "Menu" > "Setup" > "Option" > "Terminal
setting" > "Headphone out setting".
Item
Audio output from headphones only.
Headphone
Audio output from headphones and
Dual
speakers.
NOTE
• This function does not work when "Change audio
output device" (Page 31) is set to "By AQUOS audio SP"
or "Headphone/Audio out select" is set to "Audio out".
• Regarding the volume adjustment when "Dual" is set:
− Adjust the speaker volume with the i+/- buttons
on the remote control unit.
− Adjust the headphone volume with the Yk/l
buttons on the TV.
− The headphone volume is not muted even by pressing
e (Mute) button on the remote control unit.
• When not using the headphones:
− Audio outputs from the speakers regardless of the
settings.
Option

Colour system

You can change the colour system to one that is
compatible with the image on the screen.
Go to "Menu" > "Setup" > "Option" > "Colour
system".
NOTE
• The factory preset value is "Auto".
• If "Auto" is selected, the colour system for each channel
is automatically set. If an image does not display clearly,
select another colour system (e.g., "PAL", "SECAM").