Sharp AQUOS LC-70LE836E Operation Manual page 18

Initial auto installation
Searching for satellite broadcasts
(835 series only)
Press c/d to select "Yes", and then press ;.
Yes
• If you do not perform "Satellite search" setting,
select "No", and then press ;.
• The current DVB-S/S2 setting screen is displayed.
Satellite System
Max. 4 satellites on DiSEqC multiswitch
LNB Frequency
Satellite Low
other
Next Change setting
• You must first complete "Change setting" before
moving to the "Next" setting.
1 When you change the antenna
connection setting:
Press c/d to select "Change setting", and then
press ;.
• The antenna connection setting screen is displayed.
No
NOTE
High
• You can select the antenna connection method from the
five types. Consult your dealers before using a method
other than "Single satellite".
E
"Single satellite" setting
Press a/b to select "Single satellite", and then
1
press ;.
Press a/b to select "SAT1 [None]" to display
2
the satellite broadcasts that the TV can receive,
and then press ;.
Single satellite
2 satellites on 22kHz switchbox
2 satellites on toneburst switchbox
Max. 4 satellites on DiSEqC multiswitch
Communal satellite system
SAT1 [None]
Next
16
Press a/b/c/d to select your favorite
3
satellite, and then press ;.
• You cannot select "Next" unless you set the satellite
broadcast in step 3.
Atlantic Bird 1
Euro Bird 1
Press a/b to select "Next", and then press
4
;.
SAT1 [ASTRA 1]
Next
Press c/d to select "Yes (0/22kHz)" or "No" to
5
set the LNB frequency, and then press ;.
Yes (0/22kHz)
Press a/b to select the item and press c/d
6
to adjust 9,000 MHz to 12,000 MHz to the
appropriate value.
EXAMPLE
SAT1 low
SAT1 high
OK
No