Input Select - Sharp LC-26DA5U Operation Manual

Useful adjustment settings

Input Select

Selecting input source
Use this menu to select the input source.
1
Press INPUT.
• A list of selectable sources appears.
2
Press INPUT again to select the input source.
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing a/b.
• If the corresponding input is not plugged in,
you cannot change the input. Be sure to
connect the equipment beforehand.
Selecting input signal type
For setting the signal type of external equipment
connected to INPUT 1 or 2 terminals.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "Input Select", and then
press ENTER.
4
Press a/b to select a signal type you want
to set, and then press ENTER.
• If the selected signal type is incorrect, an image
does not display or no color image displays.
NOTE
• If you set INPUT1 and INPUT2 to Auto, the TV will
automatically select the input signal.
• Check the operation manual of the external equipment
for the signal type.
• Setting INPUT 1 and INPUT 2 signal selection to "Auto"
when other equipment is connected will result in the
following connectivity priority.
INPUT 1 and INPUT 2
1. COMPONENT VIDEO
2. VIDEO
LC-26/32DA5U(E)-28-32
INPUT button
29 05.7.15, 8:20 AM
29