Data List Operations - Sharp EL-9900 Operation Manual

4. Data list operations

Descending sort, ascending sort, changing the list order and deleting the lists can be
done in the Operation menu.
Press S B OPE to access the data list operations.
1 sortA(
2 sortD(
3 SetList
4 ClrList
Chapter 10: Statistics & Regression Calculations
sortA( list )
Sorts the list in ascending order.
This function is the same as the sortA( menu item in List func-
tions.
See page 135 for details.
sortD( list )
Sorts the list in descending order.
This function is the same as the sortD( menu item in List func-
tions.
See page 135 for details.
SetList list name 1 [, list name 2 ...]
Changes the list order as specified.
Example
To change the order of lists in
order of L2, L3, L1.
Press E to execute.
Each list must be separated by
a " , " (comma).
• If only a single list name is specified, the specified list moves to
the left end of the table.
• After changing the list order, execute SetList with no argument.
The list names are redefined according to the changing order.
ClrList list name 1 [, list name 2 ...]
Deletes all the data from the specified list(s).
Example
To delete the data of L1 and L2.
Press E to execute.
Each list must be separated by
a " , " (comma).
159