Setup Menu Items - Sharp EL-9900 Operation Manual

SETUP Menu Items

DRG:
FSE:
Chapter 2: Operating the Graphing Calculator
4. Press # C to clear
the Calculation screen, type
1 0 0 0 y, then E.
For trigonometric calculations and coordinate conversions,
various angle units can be selected:
Deg Angle values to be set in degrees (default for Basic
mode)
Rad Angle values to be set in radians (default for Advanced
mode)
Grad Angle values to be set in gradients (for Advanced mode
only)
Various decimal formats can be set:
FloatPt Answers are given in decimal form with a floating
decimal point (default).
Fix Answers are given in decimal form. The decimal point
can be set in the TAB menu.
Sci Answers are given in "scientific" notation. For example,
"3500" is displayed as "3.500000000E3". The decimal
point can be set in the TAB menu.
Eng Answers are given in "engineering" notation with
exponents set to be multiples of 3. "100000" will be
displayed as "100.0000000E3", and "1000000" will be
shown as "1.000000000E6". The decimal point can be
set in the TAB menu. (for Advanced mode only)
Note: If the value of the mantissa does not fit within the range
±0.000000001 to ±9999999999, the display changes to
scientific notation. The display mode can be changed
according to the purpose of the calculation.
25