Table of Contents
Advertisement
c.
Power Switch
The On/Off switch is located on the back lower section of the vacuum, (fig. 4/4).
fig. 4/4
Press the On/Off button with your foot to start the vacuum cleaner.
Press again to turn off.
d. Handle Release Pedal
To release the handle, push the handle release pedal located on the lower left side of
cleaner, (fig. 4/5).
fig. 4/5
CAUTION! Entanglement Hazard: The brushbar continues to rotate while the hose is being
removed or in use and at all times while cleaner is on. Keep hair, loose clothing, fingers and
all parts of the body away from brush area while cleaner is on. The vacuum cleaner must be
in the upright position to lift the rotating brush off the carpet when cleaning elevated areas
above the floor, such as steps.
NOTE: The brushbar could cause rug fringe areas to become tangled within the cleaner. Use
care when vacuuming throw rugs with fringes.
6
Advertisement
Table of Contents
