Hamilton Beach HB-0604 Owner's Manual
  1. Manuals
  2. Brands
  3. Hamilton Beach Manuals
  4. Vacuum Cleaner
  5. HB-0604
  6. Owner's manual
Hamilton Beach HB-0604 Owner's Manual

Hamilton Beach HB-0604 Owner's Manual

Bagless upright vacuum cleaner
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Bagless Upright Vacuum Cleaner
Owner's Manual
Read BefORe Use
Model No. HB-0604

Advertisement

Table of Contents
loading

Related Manuals for Hamilton Beach HB-0604

Summary of Contents for Hamilton Beach HB-0604

  • Page 1 Bagless Upright Vacuum Cleaner Owner’s Manual Read BefORe Use Model No. HB-0604...

  • Page 2: Table Of Contents

    WELCOME! Congratulations, you have acquired a high-quality Hamilton Beach® Bagless Upright Vacuum Cleaner. This unit is packed with many features that you will find convenient to use. It will provide you with trouble-free use if you follow the safety precautions and operating instructions provided in this easy-to-use manual.

  • Page 3: Important Safeguards

    1. IMPORTANT SAFEGUARDS WARNING! Shock Hazard: Always switch off and unplug the vacuum cleaner from the electrical outlet before assembling, opening or emptying the dirt container, or before connecting/disconnecting the attachments. CAUTION! Suction Hazard: This vacuum cleaner is a very powerful unit. Before plugging the cord into the electrical outlet, make sure the switch is in the “off”...

  • Page 4: Save These Instructions

    13. do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. 14. do not pull or carry by the cord or the hose. do not use the cord or the hose as a handle, close a door on the cord or the hose or pull the cord or the hose around sharp edges or corners.

  • Page 5: Parts And Accessories

    2. PARTS AND ACCESSORIES Handle grip 12. scuff guard bumper Handle 13. dust brush air powered pet tool 14. Hose caddy Carry handle 15. Upper cord hook foam filter assembly 16. Crevice tool and extension wand (located behind dirt container) 17.
  • Page 6 NOTICE: This appliance has a constantly rotating brushroll which, when left in contact with linoleum, parquet and other hard floors can damage the floor surface. Raise the height of the brushroll to the highest setting, #5. This can be done by adjusting the carpet height adjustor dial on the front of the vacuum’s base. do this each time when using this vacuum on linoleum, parquet and hard flooring.

  • Page 7: Assembly

    3. HOW TO ASSEMBLE a) Handle Assembly Tool required: Phillips screwdriver. slide the handle piece and back piece into the slots in the back of the unit. Insert the screws into the holes as indicated, and tighten with a Phillips screwdriver. (fig 3/1) fig 3/1.1 fig 3/1 slide the back piece into the slots in the lower base.

  • Page 8: How To Operate

    4. HOW TO OPERATE a) Cord Release Turn the upper cord release for easy cord removal (fig. 4/1). Use the handy cord clip located on the back just below the handle. This will allow you to secure any excess cord and reduce any unnecessary risk while operating the appliance. (fig. 4/1.1) Cord Release Clip fig 4/1...
  • Page 9 On/Off Switch • Plug the cord into the electrical outlet. • Turn the vacuum on by pressing the red on/off pedal located on the lower back of the unit. d) Handle Release Pedal To release the handle, push the handle release pedal located on the lower left side of the cleaner. (fig. 4/3) fig 4/3 CAUTION! Entanglement Hazard: The brushbar continues to rotate while the hose is being removed or in use and at all times while cleaner is on.
  • Page 10 Using the Accessories • The vacuum cleaner handle must be a in a upright and locked position in order to raise or lower the brushbar. Turn the carpet height adjuster to the highest carpet setting, #5. (fig 4/5) fig 4/5 • Remove the lower hose from the base of the vacuum and the upper hose from the hose caddy. (fig. 4/6) fig 4/6 • Any of the accessories can be directly attached to the hose end or the end of the extension wand. (fig.4/7) fig 4/7...
  • Page 11 • Simply push the attachment firmly onto the end of the extension wand. To remove the tool, twist and pull apart gently. (fig. 4/8) fig 4/8 There are several attachments that are found with this vacuum. Air powered pet tool: easily picks up pet hair and is great for upholstery and car interiors.
  • Page 12 5. DIRT CONTAINER AND REMOVAL AND REPLACEMENT OF FILTERS WARNING! Moving parts can pinch and crush. Always unplug this appliance before servicing. a) Emptying the Dirt Container 1. Press the dirt container removal button and lift the dirt container from the cleaner. (fig.
  • Page 13 2. To clean the foam filter, separate the filter assembly by removing the foam filter from its plastic housing. (fig. 5/4) Tap the foam filter on the inside of a trash can to remove excess dust and dirt from filter. fig 5/4 3.
  • Page 14 Exhaust Filter Removal and Replacement To remove the exhaust filter, first remove the dirt container and press the red tab on the front of the exhaust cover and lift to remove. (fig. 5/7) fig 5/7 1. Press the gray tab on the exhaust filter and lift the filter out of the base of the vacuum cleaner.
  • Page 15 4. To replace the exhaust filter, return the exhaust filter to the base of the cleaner and snap into place. (fig. 5/10) fig 5/10 5. Replace the exhaust filter cover and snap into place to secure. (fig. 5/11) fig 5/11 d) Replacing the Dirt Container 1.

  • Page 16: Removal And Replacement

    6. BELT OR BRUSHBAR: REMOVAL AND REPLACEMENT Tool required: Phillips screwdriver WARNING! Moving parts can pinch and crush. Unplug cleaner before changing belt or brush. To remove the belt: Lay vacuum flat and flip the vacuum to expose the vacuum base plate located on the underside of the vacuum (fig.
  • Page 17 To replace the belt, slide the belt onto the motor shaft. (fig. 6/4) fig 6/4 Place new belt in area of brushbar without bristles. (fig. 6/5) fig 6/5 With the new belt in place, pull and slide the brushbar into the underside opening, making sure that the brushbar end caps are in the correct orientation.

  • Page 18: General Maintenance

    Replace all seven (7) screws to secure the base plate. (fig. 8/1) 7. GENERAL MAINTENANCE WARNING! Moving parts can pinch and crush. Unplug vacuum before servicing. a) Debris Removal from the Base Plate Check to see if the dirt container is full. empty if needed. Plug the vacuum in and check to see if there is any suction at the end of the hose.
  • Page 19 b) Debris Removal from the air powered pet tool Turn the air powered pet tool over and slide off the locking ring. (fig.8/3) Locking fig 8/3 Ring 2. Pivot the lower housing and remove the clog. (fig. 8/4) fig 8/4 3.

  • Page 20: Troubleshooting

    IMPORTANT: The motor is equipped with a thermal protector. If, for any reason, the vacuum cleaner should overheat, the thermal protector will automatically turn the unit off. Should this occur, unplug the vacuum cleaner from the electrical outlet and turn off the switch. Remove the dirt container andempty it.

  • Page 21: Warranty

    Limited Warranty What this limited warranty covers: The manufacturer warrants that your Hamilton Beach® vacuum cleaner, model HB-0604, for a period of one year from the date of original purchase, will be free from all defects in material and workmanship. This limited warranty is granted only to the original consumer purchaser or gift recipient.
  • Page 22 This warranty gives you specific legal rights, and you may also have other rights, which vary from jurisdiction to jurisdiction. Hamilton Beach® is a registered trademark of Hamilton Beach Brands, Inc. used under license by essCO.

Table of Contents