Table of Contents
Advertisement
b. Carpet Height Adjuster
The carpet height adjuster allows you to set the vacuum to specific heights. Turn the
carpet height adjuster knob to match the surface being cleaned as described around
the knob (fig. 4/2).
fig. 4/2
The vacuum head locks when the handle is in the upright position. To release the
head for normal use, press the release pedal with your foot (fig 4/3).
fig. 4/3
NOTICE: This appliance has a constantly rotating brushroll which, when left in contact with
linoleum, parquet and other hard floors can damage the floor surface. Raise the height of the
brushroll to the highest setting, #4. This can be done by adjusting the carpet height adjustor
dial on the front of the vacuum's base. do this each time when using this vacuum on linoleum,
parquet and hard flooring. The manufacturer is not liable for damages to these surfaces if the
customer fails to follow this instruction.
Carpet Pile Height
< ½"
½" to <3/4"
¾" to <1"
>1"
Dial Setting
0
1 to 2
3
4
5
Advertisement
Table of Contents
