Individual Reports - Master/Back-Up Master/Satellite; Report Generation Procedure - Sharp UP-600 Instruction Manual

4. Individual reports — master/back-up master/satellite

(1) Report generation procedure

To generate respective reports, use the following procedure, referring to the list of individual
reports on the following pages.
1.
Turn the mode switch to the required position (OPXZ,
X1/Z1 or X2/Z2).
2.
Select "READING" or "RESETTING" depending on
your need, and press the [ENTER] key.
3.
Select the type of report you wish to generate and
press the [ENTER] key or enter the corresponding
report type No. (2-digit) shown on the display. (If the
desired type of report is not listed on the display, scroll
up or down the screen.)
4.
If you need to enter data to generate the report, follow
the instructions given on the display for entry.
23