IBM IntelliStation M Pro Installation Manual page 58

10. Insert the DIMM into the connector. Firmly press the DIMM straight down into
11. If you have other options to install or remove, do so now. Otherwise, rotate the
Installing a security rope clip
To help prevent hardware theft, you can add a security rope clip and cable to your
computer. After you add the security cable, make sure that it does not interfere with
other cables that are connected to the computer.
Before you begin, obtain the following items:
v A flat-blade screwdriver
v An adjustable wrench
v A 19 mm (0.75 in.) rope clip or wire rope (similar to National Manufacturing
v Threaded nuts that fit the rope clip
v A security cable
v A lock, such as a combination lock or padlock
Complete the following steps to install a rope clip:
38
IBM IntelliStation M Pro Types 6220 and 6230: Installation Guide
8. Touch the static-protective package containing the DIMM to any unpainted
metal surface on the computer. Then, remove the new DIMM from the
package.
9. Gently open the retaining clip on each end of the DIMM slot. Turn the DIMM
so that the pins align correctly with the connector.
the connector by applying pressure on both ends of the DIMM simultaneously.
The retaining clips snap into the locked position when the DIMM is firmly
seated in the connector. If a gap exists between the DIMM and the retaining
clips, the DIMM has not been correctly installed. Open the retaining clips,
remove the DIMM, then reinsert it.
DIMM
connector 1
drive cage back into the computer and replace the support bracket (see
"Removing and installing the support bracket" on page 27); then, go to
"Completing the installation" on page 40.
number 3230, stock number 176-735)
DIMM
connector 2
DIMM
connector 3
DIMM
connector 4