IBM IntelliStation M Pro Installation Manual page 50

Notes:
1. An optional SCSI adapter is required to connect external SCSI devices.
2. The SCSI cables used by the integrated SCSI controller cannot be used with an
Complete the following steps to cable an optional SCSI adapter:
1. Install the SCSI adapter (see "Installing an adapter" on page 28).
2. Connect the SCSI-signal cable to the adapter and one or more of the signal
3. Connect the SCSI-activity-indicator cable to the adapter and to the SCSI-LED
4. Complete the installation of the optional SCSI adapter.
30
IBM IntelliStation M Pro Types 6220 and 6230: Installation Guide
optional SCSI adapter.
cable connectors to the rear of the SCSI devices.
connector on the system board. See "System-board internal connectors" on
page 24 for the location of the SCSI-LED connector.
SCSI
signal
cable
Rear
adapter
support
bracket
SCSI signal
cable connector
SCSI activity
SCSI
indicator cable
adapter
connector
SCSI
activity
indicator
cable
94
13
SCSI
Front
LED
adapter
support
bracket