Installing Options In The M Pro Type 6230 (Tower Model) - IBM IntelliStation M Pro Installation Manual

6. If you have other options to install or remove, do so now; otherwise, go to
Replacing the cover
Complete the following steps to replace the computer cover:
1. Make sure that all cables, adapters, and other components are installed and
2. Install the cover by placing it over the chassis and pivoting it down over the
3. See "Completing the installation" on page 40.

Installing options in the M Pro Type 6230 (tower model)

This section provides instructions for installing hardware options in your
IntelliStation M Pro Type 6230 computer.
cables connected to the computer.
Rope clip
"Completing the installation" on page 40.
seated correctly and that you have removed all work tools from inside the
computer.
computer until it snaps into place.
Chapter 2. Installing the hardware
21