Printer Condition Settings; Printer Default Settings - Sharp MX-2310U Operation Manual

Printer Condition Settings

The Printer Condition Settings are used to configure basic printer settings and settings for printing from a DOS
application. To configure the settings, touch the [Printer Condition Settings] key.
These settings can be used when the hard disk drive and printer expansion kit are installed.

Printer Default Settings

The default settings are used to set advanced print conditions for printing in an environment where the print driver is not
used (such as printing from MS-DOS or from a computer that does not have the provided print driver installed).
When printing using the printer driver, the printer driver settings take precedence over the printer condition settings.
Settings
Item
Copies
Orientation
Default Paper Size
Default Output Tray
Default Paper Type
Initial Resolution Setting
Disable Blank Page Print
2
Line Thickness*
2-Sided Print
Colour Mode
3
N-Up Print*
4
Fit To Page*
Output
1 - 999 sets
• Portrait
• Horizontal
A3, B4, A4, B5, A5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 7-1/4" x 10-1/2",
5-1/2" x 8-1/2", 8k, 16k
• Centre Tray
1
• Offset Tray*
• Right Tray
Plain Paper, Letter Head, Pre-Printed, Pre-Punched, Recycle Paper, Colour
• 600 dpi
• 600 dpi (High Quality)
• (Disabled)
• (Enabled)
0-9
• 1-Sided
• 2-Sided (Book)
• 2-Sided (Tablet)
• Auto
• Black & White
• 1-Up
• 2-Up
• 4-Up
• (Use Fit to Page)
• (Do not use Fit to Page)
• (Use Print per Unit)
• (Do not use Print per Unit)
1
• Staple Position* : None, 1 Staple at Back, 2 Staples, 2 Staples (Top)
• (Use Punch)
• (Do not use Punch)
7-23
SYSTEM SETTINGS
Selections
Contents