Advertisement
8810 Respirator
Fitting Instructions
Respiratory protection is only effective if it is correctly
selected, fitted and worn throughout the time when the wearer is
exposed to hazards.
3M offers advice on the selection of products and training in the
correct fitting and usage.
For help with selecting the most appropriate forms of PPE and
relevant Health and Safety legislation, or for more detailed product
information, please contact the 3M Health and Safety Helpline on:
0870 60 800 60 (UK).
For callers within the Republic of Ireland 1800 320500.
Occupational Health Group
3M United Kingdom PLC
3M Centre,
Cain Road, Bracknell,
Berkshire RG12 8HT
Tel: 0870 60 800 60
www.3M.com/uk/ohes
1. Cup the respirator in your
hand with the nosepiece at
your fingertips allowing the
headbands to hang freely
below your hand.
3. Pull the top strap over your
head resting it high at the top
back of your head. Pull the
bottom strap over your head
and position it around the
neck below the ears.
Note - do not use with beards or other facial hair
that may inhibit contact between the face and the
3M Ireland
3M House,
Adelphi Centre
Upper Georges St
Dun Laoghaire
Co. Dublin
Tel: 1 800 320 500
edge of the respirator.
2. Position the respirator
under your chin with the
nosepiece up.
4. Place the fingertips of
both hands at the top of the
metal nosepiece. Mould the
nosepiece to the shape of
your nose by pushing
inward while moving your
fingertips down both sides
of the nosepiece. Pinching
the nosepiece using one
hand may result in less
effective respirator
per formance.
5. The seal of the respirator on
the face should be
fit-checked prior to wearing in
the work area.
a) Cover the front of the respi-
rator with both hands, being
careful not to disturb the posi-
tion of respirator.
b) Exhale sharply.
A positive pressure should be
felt inside the respirator. If any
leakage is detected, adjust
position of respirator and/or
tension of strap. Retest the
seal. Repeat the procedure
until the respirator is sealed
properly.
Advertisement
