RIDGID WD10500 Owner's Manual page 15

Repair Parts
Model Numbers WD10500 / WD10600
RIDGID parts are available on-line at www.store.ridgid.com/wetdry
Always order by Part Number - Not by Key Number
SERVICING OF DOUBLE-INSULATED WET/DRY VAC
In a double-insulated Wet/Dry Vac, two systems of insulation are provided
instead of grounding. No grounding means is provided on a double-insulated
appliance, nor should a means for grounding be added. Servicing a double-
insulated Wet/Dry Vac requires extreme care and knowledge of the system,
and should be done only by qualified service personnel. Replacement parts
for a double-insulated Wet/Dry Vac must be identical to the parts they replace.
Your double-insulated Wet/Dry Vac is marked with the words "DOUBLE
INSULATED" and the symbo
marked on the appliance.
To reduce the risk of injury from electrical shock, unplug power cord before
servicing the electrical parts of the Wet/Dry Vac.
WARNING: To reduce the risk of injury from electrical shock, unplug power
cord before servicing the electrical parts of the Wet/Dry Vac.
WARNING: All disassembly and repairs should be performed by qualified
personnel.
RIDGID 10 Gallon / 37 Liters
Stainless Steel Wet/Dry Vac
Electrical Ratings:
WD1050 120 V 9 A 60 Hz
WD1060 120 V 10 A 60 Hz
WARNING
(square within a square) may also be
15