Table of Contents
Advertisement
Magic Touch
Simply touch the area on the LCD screen that you want to focus on when taking a photo.
PRECHECK!
Select the Photo (
) mode by pressing the MODE button. page 33
Touch the Menu (
1.
Touch a desired submenu item.
2.
3.
To exit the menu, touch the Exit ( ) or Return (
Submenu items
• Off: Disable the function.
• On(
): You can simply touch the subject shown
on the LCD screen that you would like to focus on.
The brightness will also be adjusted for the optimized
value.
Tip
Using the Magic Touch
Using the Magic Touch function, you can focus on a
small section of the picture.
You can also activate Magic Touch by pressing the
same point for about 2 seconds on the LCD screen.
To take a picture when the Magic Touch function is
enabled, press the PHOTO button or simply touch
the subject shown on the LCD screen that you would
like to focus on, then hold for about 2 seconds.
When the Magic Touch function is enabled, you can touch the
AF ( ) tab on the LCD screen to set the "Focus" to "Auto."
• The following settings cannot be used with the "Magic Touch" function:
"Back Light", "Face Detection", "Focus: Manual", "Digital Zoom" or "Metering."
• Even if the "Cont.Shot" is enabled, continuous shooting is not available by touching the
LCD screen.
) tab "Magic touch."
Focus
Face Detection
) tab.
Magic Touch
/
Metering
90
MIN
90
3785
MIN
90
3785
MIN
Advertisement
Table of Contents
