Table of Contents
Advertisement
Magic Touch
Simply touch the area on the LCD screen that you want to focus on when taking a photo.
PRECHECK!
Select the Photo (
) mode by pressing the MODE button.
1.
Touch the Menu (
2.
Touch a desired submenu item.
3.
To exit the menu, touch the Exit ( ) or Return (
Submenu items
• Off: Disable the function.
• On(
): You can simply touch the subject shown on the LCD
screen that you would like to focus on. The brightness will
also be adjusted for the optimized value.
Tip
Using the Magic Touch
Using the Magic Touch function, you can focus on a small section of
the picture.
You can also activate Magic Touch by pressing the same point for
about 2 seconds on the LCD screen.
To take a picture when the Magic Touch function is enabled, press the
PHOTO button or simply touch the subject shown on the LCD screen
that you would like to focus on, then hold for about 2 seconds.
When the Magic Touch function is enabled, you can touch the AF (
tab on the LCD screen to set the "Focus" to "Auto."
• The following settings cannot be used with the "Magic Touch" function:
"Back Light", "Face Detection", "Focus: Manual", "Digital Zoom" or "Metering."
• Even if the "Cont.Shot" is enabled, continuous shooting is not available by touching the LCD screen.
) tab
"Magic touch."
page 49
) tab.
4 / 7
)
85
MIN
Focus
AUTO
Face Detection
Magic Touch
Metering
85
3888
MIN
85
3888
MIN
75
Advertisement
Table of Contents
