Installation - Delta HES Series User Manual

Call 1(800)985-6929 for Sales
Chapter 1 Use and Installation|HES Series

1-4 Installation

Servo Oil Pump
Please install the servo oil pump in an environment with the following conditions to ensure safe
product operation:
Conditions of Operation
Environment
The figure below shows that HES is installed on the machine. The screws must be secured to the
rubber mat to fixate the servo oil pump. It is recommended to add iron bars as the support of the
hybrid servo motor.
Installation Space
Since heat is generated as the hybrid servo motor is running, certain space must be reserved to
ensure good circulation of the cooling air as shown in the figure above.
When the hybrid servo motor is running, the temperature of the external cover will reach to about
100°C. Please do not touch it with hand to avoid burns.
NOTE
Please do not let any foreign objects such as fiber, paper pieces, wood chips or metal pieces to adhere to the cooling fan
of the hybrid servo motor.
Call 1(800)985-6929 for Sales
deltaacdrives.com
Environment Temperature
Relative Humidity
Oil Temperature
10cm
[4inch]
Installation Distance
deltaacdrives.com
0°C~ 40°C
20%~90%, No condensation
0°C~ 60°C (15°C~ 50°C is recommended)
Iron bar
Rubber Mat*4
10cm
[4inch]
1-6
sales@deltaacdrives.com
10cm
[4inch]
sales@deltaacdrives.com