Samsung WF337AAG User Manual page 22

troubleshooting
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
22_ Troubleshooting
WF337A-02440A-06_EN.indd 22
Temperature sensor problem.
High current detected.
High/Low voltage detected.
SilverCare™ control problem
Too many suds are detected
during the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will go back to the operation.
When it finishes washing, End and
SUdS codes will blink in turn.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
To prevent it, cut down on detergents.
2007-08-10 ¿ÀÈÄ 2:07:51