Sony ZS-RS70BT Service Manual page 21

AM TUNER STEP CHANGE
(Bolivian, Chilean, Paraguayan, Peruvian and Uruguay-
an models only)
The AM tuning interval can be changed over 9 kHz or 10 kHz.
Procedure:
1. Press the [POWER] button to turn the power on.
2. Press the [ AUTO PRESET RADIO FM/AM] button to select
AM radio function.
3. Press the [MANUAL PRESET
play of "AM- 1".
4. Press and hold (about 2 seconds) the [ AUTO PRESET RA-
DIO FM/AM] button, the message "AM 9K" or "AM 10K"
appears on the liquid crystal display (The step at the present
setting is displayed).
5. Press the [– PRESET ] or [PRESET +
.
to the "AM 9K" or "AM 10K".
6. Press the [ENTER] button, it is changed into selected setting.
Press other than [ENTER] button, will cancel this mode.
DAB RESET (AEP and UK models only)
DAB module information is initialized.
Procedure:
1. Press the [OPERATE] button to turn the power on.
2. Press the [ SCAN RADIO DAB/FM] button to select DAB
radio function.
3. Press two buttons of [ENTER] and [
4. The message "DAB" and "RESET?" are displayed on the liq-
uid crystal display alternately.
5. Press the [ENTER] button, and the initialization is started. A
screen display stops at the displayed at the time of initializa-
tion starting.
6. The message "STANDBY" appears and initialization is per-
formed, and turn the power off.
Releasing method:
Press the [ ] button, or do not perform operation for 10 seconds.
x
] button, change to the dis-
u
or
] buttons, select
>
] simultaneously.
x
ZS-RS70BT/RS70BTB
DAB MANUAL MODE (AEP and UK models only)
Receiving mode can be changed to normal (Alphabetical) mode
or manual mode.
Procedure:
1. Press the [OPERATE] button to turn the power on.
2. Press the [ SCAN RADIO DAB/FM] button to select DAB
function.
3. Press three buttons of [ ], [
x
taneously.
4. It is changed into a manual mode from a normal mode.
(Displayed values in the following fi gure is example)
DAB MANUAL
Channel
(Blink)
5. Press the [ /TUNE –] or [
DAB channel.
6. When it is not able to receive, "NOSIGNAL" and "XX"
(Channel number) are displayed on the liquid crystal display
alternately.
(Displayed values in the following fi gure is example)
DAB MANUAL
DAB MANUAL
When it is able to receive, it becomes the display received.
(Displayed values in the following fi gure is example)
DAB MANUAL
Releasing method:
Press the [MODE] button to return to normal mode.
/TUNE +] and [MODE] simul-
MANUAL: Manual mode
No mark: Normal mode
/TUNE +] buttons, change to
21