2-6.
CD BLOCK ASSY
2-7.
CD BOARD
Note 1: Before disconnecting the flexible flat cable (16 core)
of optical pick-up block, solder the short-land.
2 Solder the short-land.
Note 2: When assembling the CD board,
remove the solder of short-land
after connecting the flexible flat
cable (16 core).
3 flexible flat cable (16 core)
(CN701)
1 two tapping screw
(PWH B2.6)
– Cabinet (upper) block bottom view –
6 CD board
5 tapping screw
(P B2.6)
1 two tapping screw
(PWH B2.6)
2 CD block assy
4 Remove four solders.
1 flexible flat cable (27 core)
(CN702)
ZS-RS70BT/RS70BTB
Note 3: When installing the flexible flat
cable, ensure the colored line.
No slanting after insertion.
OK
Insert is straight to the interior.
flexible flat
cable
colored line
connector
NG
Insert is incline
flexible flat
cable
colored line
connector
11