MN003110A01-AJ
Chapter 6: Advanced Features
Parameter
Editing Keys
Busy LED
Low Batt
LED
MPL Enable
Scan List
Zone Name
The names must be configured in CPS.
Top Chan
Name
Top Zone
Name
Chan Name
NOTICE:
To edit Tx PL, Rx PL, Tx DPL, and Rx DPL, the PL Setting must be set to Disabled.
If PL setting is set to ALL, Rx or Tx, there is no Edit selection available to change the
codes for Tx PL, Rx PL, Tx DPL, or Rx DPL.
If PL setting is set to Rx, you can only edit Tx PL and Tx DPL codes.
If PL setting is set to Tx, you can only edit Rx PL and Rx DPL codes.
108
Value
ON/OFF
ON/OFF
Disabled/Rx
/Tx/All
None/Scan
List 1, 2,
3,...