Assembly - Husky HOTC5218B1QES Use And Care Manual

Assembly

1
Attaching the side handle
□ Attach the side handle D to the rolling cabinet E
using six bolts ( ). AA
NOTE: The holes in the cabinet are tapped and do not
require nuts.
3
Placing the chest
NOTE: Two people may be required to complete
this step.
□ Place the top chest (B) on top of the rolling cabinet (E).
( ) ( )
□
D
E
B
E
2
Installing the casters
□
Ensure all cabinet drawers are securely locked into
place using the key lock on the rolling cabinet (E).
□ Lay the rolling cabinet E on its back Use the
packaging material to protect the finish .
□ Mount the four swivel casters with brake F to the
rolling cabinet (E) using four bolts ( )
(
should be installed on e
□ Mount the two regular casters H to the center
the rolling cabinet (E) using four bolts ( CC) and
washers BB) per caster
□ Tighten all bolts with a wrench .
□ Return the rolling cabinet (E) to its upright position.
AA
BB
CC
4
Installing the brackets
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□ Attach the brackets (C) to the back of the
□ Tighten all screws securely with a screwdriver.
DD
6
CAUTION: Do not over tighten the screws
( )
BB) per caster The s wivel casters with brake F
.
ach end at the cabinet
( .
□
product to secure the top chest (B) to the rolling
cabinet (E). Place the brackets over
secure with four screws (DD) per bracket.
C
.
.
( )
CC and washers
( )
.
( )
E
F
the holes and
B
E