IBM PS/2 CL57 SX Hardware Maintenance Reference page 36

¦
¦
+------------------------------------+-----------------------------------¦
¦ 0137XXXX
¦
¦
¦
¦
¦
+------------------------------------+-----------------------------------¦
¦ 0166XXXX, 0167XXXX
¦
¦
+------------------------------------+-----------------------------------¦
¦ I9990301
¦ (Startup drive not found.)
¦
¦
¦
¦
¦
¦
+------------------------------------+-----------------------------------¦
¦ I9990302
¦ (Operating system not found.)
¦
¦
¦
+------------------------------------+-----------------------------------¦
¦ I998XXXX, I9990303
¦ (See "Hard Disk Partition" in
¦ topic 4.0 before replacing any
¦ FRUs.)
¦
¦
+------------------------------------------------------------------------+
IBM PS/2 Model CL57 SX HMS
Numeric Error Codes
¦ System Board
¦ Keyboard Control Card
¦ Serial Adapter
¦ System Board
¦ Communication Adapter
¦ Holder
¦ Any Serial Device
¦ Communication Cable
¦ Adapter in Communications
¦ Cartridge
¦ Communications Cartridge
¦ Start the backup copy of the
¦ Reference Diskette and check if
¦ the startup sequence is correct.
¦ 1. Select Set features from the
¦ Main Menu.
¦ 2. Select Set startup sequence.
¦ 3. Check the list of devices on
¦ the screen.
¦ Make sure that an operating
¦ system is installed.
¦ Hard Disk Drive
¦ System Board
¦ Hard Disk Drive Cable
¦ Restore the system programs onto
¦ the system partition.
¦ Set configuration
¦ Hard Disk Drive
¦ System Board
¦ Hard Disk Drive Cable
¦ Copyright IBM Corp. 1992
11.4 - 3
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦