IBM PS/2 CL57 SX Hardware Maintenance Reference page 16

Hide thumbs Also See for PS/2 CL57 SX:

Table of Contents

4.1 Restoring the Partition

If a system or hard disk problem prevents system setup or diagnostic

programs from being loaded from the protected partition, load and run the

programs from the Reference Diskette.

programs to the protected partition on the hard disk using the following

procedure.

Start the system with the customer's backup copy of the Reference

Diskette installed.

Select the Backup/Restore system programs from the Main Menu.

Select the Restore the system partition to load the system setup and

utility programs, and the customer and advanced diagnostics programs

onto the system partition of the hard disk.

If this does not correct the problem, use the backup copy of the Reference

Diskette to format the hard disk and then restore the programs to the

protected partition.

If the problem remains, return to the I998XXXX,

I9990303 error code (on page 11.4 in the Symptom-to-FRU index).

Note:

After the programs have been restored, the Diskette and F1 prompts

appear, unless an operating system is present.

IBM PS/2 Model CL57 SX HMS

Restoring the Partition

If no errors are found, restore the

4.1 - 1

Table of Contents