Removals And Replacements - IBM PS/2 65 SX Hardware Maintenance Reference

7.0 Removals and Replacements

|The arrows in the removals and replacements show the direction of movement
|to remove a FRU, to turn a screw, or to press a tab to release the FRU.
|The arrows are marked in numeric order to show the correct sequence of
|removal.
|When other FRUs must be removed prior to removing the failing FRU, they
|are listed at the top of the page.
|FRU listed, remove the FRU, and then continue with the removal of the
|failing FRU.
|To replace a FRU, reverse the removal procedure and follow any notes that
|pertain to replacement.
|arrangement information.
|CAUTION:
|Before removing any field replaceable unit (FRU), power-off the system,
|unplug all power cords from electrical outlets, and disconnect any
|interconnecting cables.
|Warning: The system board, adapters, memory modules, and the math
|coprocessor are sensitive to, and can be damaged by, electrostatic
|discharge. Establish personal grounding by touching a ground point with
|one hand before touching these units.
|Note: An electrostatic discharge (ESD) strap may be used to establish
| personal grounding.
Subtopics
7.1 1005 Cover
7.2 1010 Cover Lock
7.3 1015 Adapters
7.4 1020 Math Coprocessor
7.5 1025 Speaker Assembly
7.6 1030 Feet
7.7 1035 Front Bezel
7.8 1040 Carrying Handle
7.9 1045 Power Supply
7.10 1050 Diskette Drive
7.11 1055 Diskette Drive Support Structure
7.12 1060 Fixed Disk Drive (Front Bay)
7.13 1065 Fixed Disk Drive (Rear Bay)
7.14 1070 Fixed Disk Drive Bracket
7.15 1075 Fixed Disk Drive Support Structure
7.16 1080 Memory-Module Kits
7.17 1085 System Board
7.18 1090 Fixed Disk Drive Support Structure Bracket
IBM PS/2 Model 65 SX HMR
Removals and Replacements
Go to the removal procedure for each
See "Locations" for internal cable connection and
7.0 - 1