Viewing An External Signal Source - Samsung HL-P5063W Instruction Manual

Viewing an External Signal Source

Use the remote control to switch between viewing signals from connected equipment, such as
VCR, DVD, Set-Top box and the TV source (broadcast or cable).
Setting the Signal Source
1
Press the MENU button.
Press the ENTER button to
select "Input".
2
Press the ENTER button to
select "Source List".
Press the ... or † button to
select a signal source, then
press the ENTER button.
Press the EXIT button to exit.
Alternate method
Press the SOURCE button on the
remote control repeatedly to
select an external signal source.
NOTE
• When you connect equipment to the TV, you can choose
between the following sets of jacks: "AV1", "AV2", "S-Video1",
"S-Video2", "Component1", "Component2", "PC", "DVI" or
"HDMI" on the TV's rear panel, and "AV3" or "S-Video3" on
the TV's side panel.
Input
Source List : TV
Input
Edit Name
Picture
Sound
Channel
Setup
Move Enter Return
Source List
TV
Input
AV1 : - - - -
AV2 : - - - -
Picture
AV3 : - - - -
Sound S-Video1 : - - - -
S-Video2 : - - - -
Channel S-Video3 : - - - -
▼ More
Setup
Move Enter Return
AV1
√
√
English - 41