Picture Control - Samsung HL-P5063W Instruction Manual

Operation

Picture Control

You can use the on-screen menus to change the "Contrast", "Brightness", "Sharpness", "Color"
and "Tint" according to personal preference. (Alternatively, you can use one of the automatic
settings. See next page.)
NOTE
• "Tint" doesn't operate
in PC, DVI, HDMI or
480p-Component or
higher modes.
English - 34
Customizing the Picture
1
Press the MENU button.
Press the ... or † button to
select "Picture", then press
the ENTER button.
2
Press the ENTER button to
select "Mode".
3
Press the ... or † button to
select a particular item, then
press the ENTER button.
Press the œ or √ button to
increase or decrease the
value of a particular item.
Resetting the Picture Settings to the Factory Defaults
You can return to the factory default picture settings.
4
Press the MENU button to
display the "Mode" menu.
Press the ... or † button to
select "Reset", then press the
ENTER button.
The previously adjusted
picture settings will be reset
to the factory defaults.
Picture
Mode : Standard
Input
Color Tone : Warm1
Size : Wide
Picture
Digital NR : Off
Sound DNIe : On
My Color Control
Channel Film Mode : Off
PIP
Setup
Move Enter Return
Mode
√
Mode : Standard
Input
Contrast 90
Brightness 50
Picture
Sharpness 50
Sound Color 50
Tint 50 50
Channel Reset
Setup
Move Enter Return
▲
Contrast 90
▼
Mode
√
Mode : Standard
Input
Contrast 90
Brightness 50
Picture
Sharpness 50
Sound Color 50
Tint 50 50
Channel Reset
Setup
Move Enter Return
√
√
√
√
√
√
√
√