Advertisement
10. Use the two previously removed hex head screws to attach the middle hinge
to the divider panel.
11. Install upper door as follows:
- Remove the hex head screws nearest the middle hinge lower post. Slightly loosen the other
screw. Swing the hinge down.
- Slide plastic washer onto top hinge bracket post. Insert post into hole in top of upper door.
- Make sure that plastic washer is in place on middle hinge upper post, Raise middle hinge up
so that post fits into hole on bottom of upper door.
- Insert previously removed middle hinge screw. Tighten both middle hinge screws.
12. Install lower door as follows:
- Slide plastic washer onto middle hinge lower post. Insert middle hinge lower post
into top hole in door.
- Insert the lower hinge post into the bottom of the door.
- Use the two previously removed hex head screws and 10 mm hex nut and metal washer to
attach the lower hinge bracket to the cabinet base.
13. Screw one leveling foot through the hole in the lower hinge bracket into the cabinet base.
Screw the other leveling foot into hole on other side of cabinet base.
8
9
Advertisement
